Notícias e Eventos
A Deswik está sempre desenvolvendo algo novo…
Uma nova abordagem para a otimização de cavas
A pergunta “qual é o limite máximo de uma cava?” é uma que os planejadores de minas sempre se perguntam para garantir um projeto bem-sucedido. Este artigo analisa os métodos atuais para resolver o problema de otimização de cavas e discute o sequenciamento direto de blocos como uma abordagem mais nova que pode ser a próxima mudança de passo do setor.
A Deswik oferece uma solução de levantamento integrada que permite um fluxo de dados contínuo
A Deswik firmou parceria com o provedor de hardware líder internacional RIEGL para fornecer uma solução completa para topógrafos de minas.
2021 | UM ANO EM ANÁLISE
In 2021, we continued to develop and extend Deswik.Suite, all the while providing exceptional customer service, support and training. With the addition of Deswik.Apps, and our new series of technical sessions called, ‘Sips & Tips’, 2021 was yet another successful year for our global teams. Discover our infographic!
Sandvik acquires Deswik and launches new Digital Mining Technologies Division
We are thrilled to announce that Deswik has signed an agreement to be acquired by Sandvik, the high-tech and global engineering group headquartered in Sweden.
Deswik acquires mining mobile apps
The reach of Deswik’s strategic mine planning and design solutions is set to extend deep underground with the acquisition of a suite of apps that will enable operators to access critical, task specific data on a tablet or mobile device while offline, working in underground operations.
Deswik.OPS providing operations efficiency through collaborative operational scheduling and tracking
Many mines today are struggling with complex processes to align long-term schedule objectives with medium-term and operational schedules. Agnico Eagle in partnership with Deswik have been implementing an approach to solve these problems at their Kittila mine in Finland.
Rapidly create final pit designs with Deswik.SPD
With Deswik.SPD, users can now quickly generate multiple pit designs for any number of optimization runs, compare results and select go-forward cases. Final pit designs which took days to create manually can now be created in minutes, enabling planners to spend less time doing repetitive design tasks and more time analyzing results and evaluating options.
2020 | Um Ano Em Análise
In 2020, we focused on providing excellent customer service, support and training, whilst continuing to develop the Deswik Suite and improve the usability of our software. Check out our infographic!
Deswik.MDM providing technical data management efficiency
Deswik.MDM has been in use at the OZ Minerals Prominent Hill site since March 2019, providing critical data management, transparency, and governance for the large volumes of technical data required to keep Prominent Hill operational and productive.
Deswik teams up with RGS to deliver one-stop-shop environmental services to the mining sector
Deswik has entered a partnership with Australian environmental consultancy RGS Environmental that will allow both companies to deliver comprehensive life of mine planning solutions to their clients.
Resultados da colaboração internacional em novas tecnologias para projeto e planejamento estratégico de minas – Deswik.GO
A Deswik firmou uma parceria com a Alicanto Labs, em associação com a Universidad Adolfo Ibañez (UAI) no Chile, para o lançamento do Deswik.GO, uma ferramenta abrangente de projeto e sequenciamento estratégico para lavras a céu aberto. O Deswik.GO permite que planejadores estratégicos de minas otimizem rapidamente o formato da lavra, as fases e a sequência em sites greenfield e brownfield.
Deswik Mine Closure Risk Ratio
The Mine Closure Risk Ratio is proposed as a simple method of measuring Life of Mine risks related to mine closure. This paper looks at the Mine Closure Risk Ratio as a decision support metric used to integrate mine production and closure considerations when evaluating all business plan scenarios.
Semi-automate layout creation and design using Deswik’s Auto Designer
Deswik’s Auto Designer is one of the most powerful tools in Deswik.CAD, automating repetitive tasks using a simple rules-based approach to allow users to construct rule sets representing design criteria or steps required. This tool has now been extended to support a range of use cases for both underground and surface operations.
Improving Deswik.CAD and Deswik.Sched Startup Speeds
Tips for improving Deswik.CAD and Deswik.Sched startup speeds when working over a VPN or slow connection.
A Deswik lançou o Drillhole Optimizer (Otimizador de Malha de Sondagem), um módulo projetado para automatizar o planejamento de furos de sondagem e maximizar os retornos em seu orçamento de sondagem
Um novo módulo do Deswik.GeoTools permite que os geólogos apliquem um processo automático e otimizado no planejamento de seus programas de furos de infill, tanto em cavas a céu aberto quanto subterrâneas. Ao executar rapidamente múltiplos cenários, os geólogos têm mais tempo para analisar os resultados e selecionar o plano de sondagem de melhor valor.
Deswik.SO major release features AMS SSO version 4
2020.2 Deswik.SO has been updated to support AMS Stope Shape Optimizer version 4. This latest release from AMS features improvements to the SSO algorithm and several major new features and enhancements.
An integrated and scheduling-driven approach to Short Interval Control in mining
With the increasing amount of operational execution data being generated by mining operations, Deswik has been exploring how to truly integrate operational plan execution with upstream mine planning processes. This paper discusses the people, process, and technology considerations for SIC in mining, and provides a review of several SIC concepts applied in the industry today.
Deswik’s Road Audit tool increasing efficiency in open cut mine operations
Conducting road audits is usually a manual and time-consuming process. By using the Deswik Road Audit tool, sites can complete the road audit process much faster, allowing operations to get quicker feedback and free up personnel to complete value-add tasks.
Next generation technology delivers efficient, sustainable mine planning and enables technical workforces to operate remotely from site
Deswik.MDM makes it possible for technical services professionals to collaborate efficiently and effectively with off-site colleagues whilst maintaining data and approvals integrity.
Advanced End of Month Reporting
As mining operations seek greater conformance to plan and margins become increasingly tight, end of month (EOM) reporting needs to keep pace with these increasing requirements. This paper provides the mining industry an option for greater analysis of EOM data whilst decreasing the time consuming workload on survey departments.
Best practices for underground short-term scheduling
Short-term scheduling of an underground mine is a fast-paced, repetitive process. This paper provides some recommendations on best practices to streamline and automate this process.
2019 | Um ano em análise
Em 2019, continuamos com nosso foco em fornecer uma plataforma integrada, que comporte o design e o planejamento de lavra em todos os horizontes de planejamento e da cadeia de valores da mineração. Veja nosso infográfico!
Face it, you need mapped data to validate your geological models!
Why Leapfrog and Deswik.Mapping are a winning combination for resource geology teams: an underground mapping to implicit modeling workflow.
6 simple hacks for surveying and general CAD work – Part 2
As a number of survey departments make the transition to Deswik, we are seeing an increased interest in the open pit survey tools that Deswik has to offer. This blog post shows some open pit-based workflows that survey departments may have to perform.
Como melhorar o processo de auditoria de acessos em minas a céu aberto
A construção e manutenção de acessos são elementos cruciais para as operações de minas e há um foco cada vez maior na auditoria e conformidade de acessos.
Apresentamos o Deswik.GeoTools – nosso novo conjunto de ferramentas para amostragem e mapeamento geológico
Um novo conjunto de ferramentas para amostragem e mapeamento geológico, o Deswik.GeoTools é perfeitamente integrado com o Deswik Suite e foi projetado para melhorar a eficiência, eliminando a duplicidade no manuseio de dados.
Deswik consolida seu compromisso com o setor mineral brasileiro através da aquisição de Parte da MCB
A Deswik anuncia hoje que adquiriu uma participação minoritária na sua representante brasileira de longa data, a MCB Serviços e Mineração.
Let’s work together: why data interoperability initiatives are good news for mining companies
The Group’s Open Mining Format (OMF) interoperability project is developing an open 3D data exchange format to enable complex files to be shared seamlessly between third party mining solutions, and encouraging vendors to adopt them.
Say no to buffer tasks
This article looks at the applicability of introducing buffer tasks to a schedule, in order to apply the Theory of Constraints and suggest alternates. Find out why the recommended approach is to analyze mining “stocks” and ensure that the correct mining rate is being applied, rather than introducing buffer tasks.
Um ano em análise
Continuamos nos esforçando para fornecer uma plataforma integrada, que comporte o projeto e planejamento de lavras em todos os horizontes de planejamento e da cadeia de valores da mineração. Reunimos uma série de vídeos para expor nossos principais destaques dos últimos doze meses. Confira!
Gere sólidos com qualidade a partir de dados de escaneamento de alta resolução em menos tempo
Projetado para processar grandes quantidades de pontos de levantamento e automatizar o processo de criar sólidos a partir deles, o Deswik.AdvSurvey foi concebido para atender às constantes mudanças na aplicação de levantamentos no setor de mineração.
6 simple hacks for surveying and general CAD work
Deswik.CAD users have some powerful in-built survey functionality at their fingertips. Here is a short compilation of some useful tips for making the most out of Deswik.CAD for surveying purposes and some standard CAD tips for all users.
Integrating infrastructure and production schedules
This paper provides recommendations for optimizing critical path by managing shared locations and materials in underground construction projects.
2018 by the numbers
In 2018, we continued to extend our software’s capability and focus on usability to make our users’ lives easier. We remain dedicated to our user community with increased support, free online training and new user events to be launched globally.
Block model knowledge for mining engineers
This paper has been written to introduce new mining engineers to mineral resource block models: their structure, the brands they may come across, the types they may come across, and issues that they will need to understand to avoid mistakes in their use.
School of Mine partnership inspires educators and students alike
For the past five years, Lewis Meyer has taught Deswik software at the Camborne School of Mines at the University of Exeter. As Senior Lecturer in Mining Engineering, 257 students have graduated from Lewis’s Deswik course which consistently receives rave reviews from students.
Mining for closure
This article, recently published in Global Mining Review, describes the modeling techniques tried and tested at an Australian mine. The mine needed a solution to produce a 3D visual landform which, while reducing costs, could also achieve desired rehabilitation objectives.
A Deswik combina o transporte com a otimização e a movimentação de materiais
A última atualização do Deswik foi feita para mudar a maneira como engenheiros planejam sua mina, ao mesmo tempo em que leva em conta as restrições ao transporte e alterações no relevo.
Deswik Copperbelt Conference 2018
We are pleased to invite our customers and partners from throughout Zambia and the Democratic Republic of Congo to see first-hand the value Deswik’s applications offer the Copperbelt region.
Triangle Slope Markers
Triangle Slope Markers provide a simple, graphical tool to quickly demonstrate the behavior of surfaces and solids based on the user requirements.
Latest integration improves accuracy and productivity in underground drill & blast mining
We’re pleased to welcome drill and blast technology manufacturer Minnovare as an integration partner, as part of our commitment to providing a flexible and integrated mine planning platform.
Best practice for processing UAV data in Deswik
With the prevalence of UAVs within the mining industry, operations now have at their disposal unprecedented amounts of data to use. Turning this data into usable and valuable information is the key to providing value.
Deswik User Conference 2018: Technology change experts head speaker lineup
Two experts on technology and change management will be heading the lineup for the Deswik User Conference 2018.
Deswik proud partners of Life-of-Mine conference
The upcoming Life-of-Mine Conference has proven to be the perfect partnership for Deswik, who are proud to be a gold sponsor of the event being held in Brisbane on July 25 to 27.
Don’t forget the water! A common error in truck schedule modelling
This article looks at the impact of scheduling site trucks filled with dry tonnes from the block model rather than wet tonnes required by the trucking simulation.
Truck Schedule Modelling: Centre-Line vs. Truck Path
Is the industry standard practice of modelling trucking using the ramp centre-line, versus using the actual truck path an issue or not?
Guidelines and considerations for open pit designers
This article has been written specifically for those who are new to pit design and may need some advice on how to undertake a pit design.
Celebrating 10 years of mining innovation
It can be tough being a newcomer in an established industry but, after ten years in business, we have proved our staying power.
Picture the future of mining
Deswik continues to bridge the gap between geology and mine planning. A new collaboration with Imago will extend the capability of Deswik’s operational geology platform.
2017 by the numbers
In 2017, we continued to work hard to improve and expand our support services for our users around the world. We’ve introduced many new tools and enhancements…
Short-range ore control modeling & design tool
Earlier this year, we released our short-range ore control modeling & design tool, Deswik.OPSTS to allow open pit mine planners to quickly produce short-term production plans from a single pit shell solid.
New survey features in Deswik.CAD 2017.1 & 2017.2
In 2017 there have been over 50 enhancements added to the roadmap and at present over 60% of them have been added into the CAD platform.
Investing in future tech entrepreneurs
Deswik is pleased to support the RCL Accelerator program which provides funding, mentoring and support to start-ups in Brisbane, Australia.
Practical tools for integrated planning
Integrating landform engineering and closure cost calculations into your tactical mine planning delivers a more complete, overall view of the value of a project.
Introducing .DUF (Deswik Unified File) format
The Deswik Unifed File format (.DUF) is a new file format for faster loading and saving of CAD files. The bigger the file, the bigger the performance improvement
Blend 2: multi-period destinations decisions
Maximize the value of your operation by optimizing the decision of where to send mined material across multiple periods.
Chilean recognition for innovative optimization
Our joint work with University Adolfo Ibáñez in Chile was recently recognized through the awarding of the Chilean National Prize of Technologic Transfer.
New underground haulage solution
A technology preview of Deswik.LHS Underground is now available. Create your underground haulage network from your 3D mine model, and directly integrated with your schedule.
Supporting Women in STEM
Deswik is pleased to take part in the Austmine Women in STEM: METS Career Pathway Program, aiming to support and promote women in STEM while improving gender diversity in the METS sector.
Deswik Suite 2017.1
A Deswik tem o prazer de anunciar o lançamento do Deswik.Suite 2017.1, uma nova versão com 254 aprimoramentos e dois novos módulos.
Coming soon: Deswik.LHS embedded in Deswik.Sched, Deswik.LHS for UG
From 2017.2 Deswik.LHS will be available as a plugin in Deswik.CAD & Deswik.Sched. Deswik.LHS will also be available for Underground mining operations.
What are the plotting elements and how do they fit together? In this two-part video series, we take you through an overview of our key plotting functions with tips on how to best set them up to minimize data replication.
Deswik Users Conference – Europe
9th – 11th May 2017. We invite our users and partners to join us in Skellefteå, Sweden for an informative two-day event on the latest industry trends and Deswik software advances.
Everything you wanted to know about Pseudoflow but were afraid to ask… A discussion of Deswik Pseudoflow pit optimization in comparison to Whittle LG pit optimization.
2016 by the numbers
Our awesome software team continues to deliver powerful tools for our users. Here’s a snapshot of the enhancements for the year…
DESWIK to unveil new operations scheduling tool at MinExpo 2016
Deswik announces the launch of Deswik.OPS, their new operational shift planning and tracking tool, which is set to revolutionize the way mines manage their daily operations.
Use of Reconciliation tool for End-of-Month process
Nova Project have been using Deswik.CAD’s reconciliation tool for their End-of-Month process. This has resulted in a higher quality report for the contractor on site and significant time savings.
Deswik to showcase new mobile 3D scanning integration at ISM 2016
Deswik announces the inclusion of new mobile 3D scanning tools in its upcoming software release, version 2016.2.
DESWIK co-founder national finalist in EY Entrepreneur Of The Year
We’re pleased to announce that Wayne Romer has been selected as a national finalist in the 2016 EY Entrepreneur of The Year awards.
Deswik.Suite 2016.1 – Staff picks
Three months on since the release of Deswik.Suite 2016.1, we continue to explore some of the 2016.1 enhancements, with a selection of our team’s favorite new tools.
The fall and rise of draglines
In a compelling article recently published in World Coal, Neil Tyson details ways to improve dragline engineering and in turn improve planning cycle time and mitigate complex risks.
Running Deswik.Suite on VDI platforms
We often get asked about running Deswik.Suite on virtualized platforms (VDI). Whilst technically challenging, it is still possible to run it effectively on a VDI platform under very specific conditions.
Deswik to showcase new caving tool at MassMin 2016
Deswik will officially launch and showcase its new caving tool to the underground mining industry at MassMin 2016
Resource leveling algorithms: a comparison
Deswik.Sched has come a long way from version 1.2 where resource leveling could only be done on task priorities. There’s now three major leveling algorithms which support a myriad of features.
Deswik is pleased to announce the release of Deswik.Suite 2016.1, a major release featuring 141 enhancements and two exciting new products.
Deswik.CAD – Survey functionality
Deswik.CAD now features in-built survey functions, commonly used by underground surveyors internationally.
New in 2016.1: Graphics in the scheduler
Graphics are now supported in the scheduler. The task graphics can be saved in the scheduler file and Deswik.Sched can be used stand-alone with animations.
2015 by the numbers
2015 has been another busy year for our software team. We take a look back at our major achievements:
Deswik.CAD integrates with Ventsim
In Deswik.Suite 2016.1, users will be able to export a network of tunnels directly from Deswik.CAD to a native Ventsim file.
Deswik Seminar at Mining World Russia
In conjunction with MiningWorld Russia 2016, Deswik will run a half-day seminar on “Solutions for effective mine planning“ on 27th April.
Case study: Dawson Mine
With Deswik’s assistance, Anglo American’s Dawson mine managed to achieve significant haulage and engineering productivity improvements, directly reducing their cost per tonne of coal.
Coming soon in Deswik.Suite 2016.1
Plenty of new tools and features to look forward to in 2016 with the next release of Deswik.Suite. Find out more…
Deswik.Suite Portable (Application Virtualisation)
This article outlines outlines our application virtualisation solution for rapid deployment of Deswik.Suite updates
Exposibram (14th – 17th Sept) & Perumin (21st – 25th Sept)
Things have been busy for Deswik South America since the opening of our Santiago office (Chile). This month we continue to spread the word at key mining events in the region.
Deswik Software Suite v5.1 – New Features
Version 5.1 of the Deswik Suite is now available, featuring over 200 enhancements. Highlights for this release include…
Deswik.Suite’s software release cycle – explained
This article explains the development methodology and release process for Deswik.Suite – and in particular why we release new versions and patches so frequently.
Process maps in Deswik.CAD
Process maps have become a very important part of Deswik’s implementation strategy. They provide an easy, non-scripted solution to building streamlining repetitive tasks.
A holistic approach to mine planning
Minimizing risk of acid mine drainage: discover the techniques for integration of production and destination scheduling for planning engineered waste rock dumps and tailings management.
Deswik software recognised for product innovation and excellence
Deswik has been announced as an ABA100 Winner for Product Innovation and Product Excellence in the Australian Business Awards 2015.
Creating a pit design
In this short video, Deswik Technical Director Wayne Romer shows you how to create and adjust your pit design using expansion layers, bench ramps and switchbacks.
Deswik launch new software tool for dragline and dozer design
Deswik launches Deswik.DD, a sectional design & analysis tool for design, optimisation and communication for dragline or dozer push operations.
Dynamic block model interpolation in Deswik.CAD
Dynamic block model Interpolation with Deswik.CAD is quick and easy. In this video, we show you how to update a block model from blast hole data.
Deswik expands into civil tunnelling market
We are pleased to announce our expansion into the civil tunnelling market with our new strategic partner Skarpa Pty Ltd.
The Scheduling Team continually works to improve the speed and performance of resource leveling. This quarter, we take a retrospective look at one of our clients’ schedule since it first arrived at Deswik in March 2012.
Bridging the gap between geology and mine planning
DESWIK announces a technology partnership with ARANZ Geo Limited, developers of Leapfrog 3D geological modeling software.
Deswik at Exponor 2015
Deswik Chile will once again have a booth in the Austrade pavilion at EXPONOR in Antofagasta between the 11th and 15th May 2015.
Advanced Deswik.Sched training now available
The much anticipated Advanced Deswik.Sched module has also been published and has received positive feedback from numerous recipients.
Pivot Table Reporting
Deswik.Suite V5.0 contains some exciting new pivot table reporting functionality (found using the Deswik.LHS Reporting command, and called Pivot Table).
Deswik Software Suite v5.0 – New features
Version 5.0 of the Deswik software suite is now available, featuring some exciting new functions and improvements.
Value Impacts of Truck Limited Haulage
A study has been completed producing a mining schedule in conjunction with a dumping schedule and haulage analysis.
2014 by the numbers
Our software team has been busy this year continuously delivering improved solutions.
Deswik at the 2015 SME Annual Conference
Deswik will be participating in the 2015 SME Annual Conference and Expo in Denver, Colorado from 15th to 18th of February 2015.
Save The UQEM: Enhancing Our Industry Safety Culture
The UQEM plays an irreplaceable role in the Australian mining industry by bridging the gap between theory and practice at UQ. It is currently under review for closure.
Life’s too short to VDCL
We use this feature quite a bit here at Deswik. It still surprises me how many people don’t know about the DCF file format. VDCL is the original Deswik.CAD file format.
Deswik gains international attention
Deswik was awarded the Dermot McManus Award for Leadership and Innovation at the Premier of Queensland’s Export Awards on Thursday 16th October.
Impacts of IPCC on Pit Shell Optimization
This case study outlines the process followed in the Deswik Software Suite to compare trucked material movements and an alternative strategy of semi-mobile in-pit crushing and conveying.
Deswik Goes Back to University
Deswik are pleased to announce the provision of Deswik Software for use by Mining Engineering students at UQ.
Deswik.Suite v4.0 Released
V4.0 brings enhancements across the entire toolset and represents the largest release from Deswik to date.
Deswik and RWE form Continuous Mass Mining Partnership
Deswik partners with RWE to launch the first generation of mine planning tools for CMM applications.
Net Present Value Optimization at Vale
SOT+ case study kicks off at Vale – advancing mine plan optimization.